Eurorack rails set 1U/84HP Intellijel 1U

26.40

1x 1U/84HP (Intellijel 1U size) Eurorack rails set complete row for building your own DIY Eurorack case.

The set consists of the following parts:

2 x 84HP eurorack rail without lip, rails are already tapped with M5, hassle-free configuration.
2 x 84HP threaded inserts
2 x 3D printed 1U Intellijel size side plates to connect your rails together
4 x screw M5x12 to fasten the rails to the side plates
4 x woodscrew 3×12 to attach rail set to your case

Category:

Description

Dimensions:
Complete set length= 434mm (84HP = 84x 5,08 = 426,72 + margin* = 428mm + 6mm sideplate thicknes = 434mm total length
Height= 30mm
Width 40,8mm

Total width 1U = 40,8mm

We 3D print all side plates in our in-house 3D print farm.
All side plates are 3D printed with high accuracy on current generation 3D printers. We tested a lot of different materials and chose the most robust polymer available on the market to assure maximum strength. We personally check all products to ensure only the best quality.

There are significant advantages in using this additive manufacturing technique:

Cheaper to produce, so less expensive to purchase
Lightweight and incredibly strong
It doesn’t scratch your beautiful case when installing your rail sets

*After years of building experience, we cut our rails with a small extra margin.
We’ve found that modules don’t always have an exact HP width. It can happen that when you cut the rails to exact 84HP dimensions, not all your modules will fit. The threaded strips/inserts have an exact 84HP size, so you can’t go wrong installing your modules. Trust us. We’ve been there.

The complete rail set is shipped unassembled and requires user assembly. This assures the lowest shipping cost possible.

Additional information

Weight 0.5 kg