Eurorack rails set 10U/104HP

130.17

10U/104HP Eurorack rails set complete row for building your own DIY Eurorack case.

The set consists of 1x 1U/104HP Intelijel rails set + 6U/104HP rails set + 3U/104HP rails set:

6 x 104HP eurorack rail with lip, rails are already tapped with M5, hassle-free configuration.
2 x 104HP eurorack rail without lip for the 1U rails, rails are already tapped with M5, hassle-free configuration.
8 x 104HP threaded inserts
2 x 3D printed 6U side plates to connect your rails together
2 x 3D printed 1U Intellijel size side plates to connect your rails together
2 x 3D printed 3U side plates to connect your rails together
24 x screw M5x12 to fasten the rails to the side plates
16 x woodscrew 3×12 to fasten rails set to your case

Category:

Description

10U/104HP Eurorack rails set complete row for building your own DIY Eurorack case.

The set consists of 1x 1U/104HP Intelijel rails set + 6U/104HP railsset + 3U/104HP railsset:

6 x 104HP eurorack rail with lip, rails are already tapped with M5, hassle free configuration.
2 x 104HP eurorack rail without lip for the 1U rails, rails are already tapped with M5, hassle free configuration.
8 x 104HP threaded inserts
2 x 3D printed 6U sideplates to connect your rails together
2 x 3D printed 1U Intellijel size sideplates to connect your rails together
2 x 3D printed 3U sideplates to connect your rails together
24 x screw M5x12 to fasten the rails to the sideplates
16 x woodscrew 3×12 to fasten railset to your case

Dimensions 1U/104HP rials set complete row:
Complete set length= 536mm (104HP = 104x 5,08 = 528,32 + margin* = 530mm + 6mm sideplate thicknes = 536mm total length
Height= 30mm
Width 40,8mm

Dimensions 3U/104HP rials set complete row:
Complete set length= 536mm (104HP = 104x 5,08 = 528,32 + margin* = 530mm + 6mm sideplate thicknes = 536mm total length
Height= 30mm
Width 133mm

Dimensions 6U/104HP rials set complete row:
Complete set length= 536mm (104HP = 104x 5,08 = 528,32 + margin* = 530mm + 6mm sideplate thicknes = 536mm total length
Height= 30mm
Width 266mm
Weight per railset +/- 450 grams

We 3D print all side plates in our in-house 3D print farm.
All side plates are 3D printed with high accuracy on current generation 3D printers. We tested a lot of different materials and chose the most robust polymer available on the market to assure maximum strength. We personally check all products to ensure only the best quality.

There are significant advantages in using this additive manufacturing technique:

Cheaper to produce, so less expensive to purchase
Lightweight and incredibly strong
It doesn’t scratch your beautiful case when installing your rail sets

*After years of building experience, we cut our rails with a small extra margin.
We’ve found that modules don’t always have an exact HP width. It can happen that when you cut the rails to exact 84HP dimensions, not all your modules will fit. The threaded strips/inserts have an exact 84HP size, so you can’t go wrong installing your modules. Trust us. We’ve been there.

The complete rail set is shipped unassembled and requires user assembly. This assures the lowest shipping cost possible.

Additional information

Weight 2.42 kg