MDLRCASE_6U_104HP_Performer_Series_eurorackcase_perspective
MDLRCASE_6U_104HP_Performer_Series_eurorackcase_perspective
 

Eurorack case 6U/104HP Performer Series MKI

€660.33

Meet the new MDLRCASE portable Eurorack case; the 6U 104HP Performer Series MKI.

The 6U 104HP Performer Series MKI case is our first portable case and is the first entry level model in our lineup. This is the perfect solution if you’re looking for a portable Eurorack case that can be used both in the studio or live on stage.

Filling two rows measuring 104HP and powered by Boardpower feeding two busboards, this 6U case offers 40 headers of connectivity giving you enough power to drive your favorite modules as you go out on the road to play.

You can easily take this rig with you while it’s fully patched because our lid design builds in the required spacing for your cables, making this unit a favorite for its ease of use.

With reliability in mind we build our cases with Penn Elcom components for maximum durability and apply a two-component coating solution that adds an extra layer of protection to your serious investment. 

Two adjustable feet in the bottom of the case allow the artist to set the optimal playing angle assuring maximum ergonomics while increasing fun and comfort for the performer.

Out of stock

Out of stock

SKU: PS6U104HPMK1 Category:
 

Description

Specifications:

  • 104HP 6U  (208HP  module space)
  • Dimensions: L= 60cm W=32cm H=16,3cm
  • Total weight 5,7 kg
  • Space from top rail to bottom 7cm
  • Can be carried while patched
  • Handmade case, fully nailed and glued construction.
  • 12mm birchwood with a special 2 layer protection coating
  • Flush-mounted rails allow the modules to be mounted evenly with the sides of the case
  • Lid allows to carry the case fully patched
  • 4x 104HP rails with M3 threaded inserts
  • Konstantlab Boardpower lightweight PSU. +12V 2A, -12V 1.2A, 5V 1.5A
  • 2 x MDLRCASE Passive busboard, total of 40 headers.
  • Total weight: 5,7 kg (w/ PSU, busboards and rails installed, including lid.)
  • 1 side-mounted power switch + powerinlet
  • 1x  1.8m power cord
  • 1 x Meanwell power adapter included
  • High-quality Penn Elcom components
  • Super-comfortable Luxe carrying handle
  • Anti-slip rubber feet
  • Completely assembled, wired, tested, and ready to play!

 

PSU:

Konstantlab Boardpower

Dimensions: 10 × 4.5 × 2 cm
Weight:  127 g

OUTPUT POWER: 45W

OUTPUTS:
+12V / 2A
-12V / 1.2A
+5V / 1.5A

INPUT
18V (16-20V)

OUTPUT CONNECTORS
2x 16 pin IDC for flat cable
4x WAGO spring terminals

INPUT CONNECTORS
WAGO spring terminals
Panel with 5,5 x 2.1 DC input (center positive) and switch included

PROTECTIONS
Input filter
Input overvoltage
Input reverse polarity voltage protection
Output overvoltage
Output short circuit – automatic recovery
Output over current – automatic recovery
All output protections are independent for each rail

EFFICIENCY
92%

OTHER
Input common-mode LC filter with high efficiency of canceling noise and interference from input connector
Additional input filter on each regulator

 

MDLRCASE busboard:

2x screw terminals for power supply/second busboard connection
20x standard eurorack power connectors with safety notches to protect from modules reversed connections
3 power rails 12V, -12V, 5V
voltage indicator LED on every power line
decoupling capacitors to remove residual PSU ripple at every power line
switchable 5V linear voltage regulator for power supplies that don’t support 5V output

Related products