Eurorack travel case 7U/94HP

700.83

Perform around the globe.

As a musician, artist or performer you always want to have your favorite modular gear with you, wherever you go.

After the knowledge of more than 3 years of building eurorack cases, listen to customer feedback and by following the trends in the market, we decided that it was time to build a travel case.

The new MDLRCASE 7U/94HP Compact Travel series eurorack case meets carry-on luggage size requirements for most airlines.

The new MDLRCASE 7U/94HP Compact Travel case is constructed with lightweight boards made of Con-Pearl® which consist of three polypropylene layers. The middle layer obtains its unique structure by thermoforming. Lamination to the outer layers results in a very light and stable trilaminate structure.

Besides the case construction we also totally re-engineered the Eurorack rails set which resulted in a weight loss of over 40%.
We kept the original design and asked our eurorack rails supplier to cut away the bottom part of the rails which in our case is not used at all

The next step was redesigning the existing side plates to replace the aluminum ones with a whole new concept, 3D printed side plates.

We designed and developed a new concept of easy to assemble side plates, which were all 3D printed in our “in house” 3D printing factory.
The side plates are produced with one of the toughest polymers used for 3D printing and are accurately measured, sturdy and robust.

By using this additive manufacturing production technique, we also reduced the weight of the side plates with an overall weight loss of 190%

Out of stock
SKU: CT7U94HP Category:
 

Description

MDLRCASE 7U/94HP COMPACT TRAVEL SERIES

Technical specifications:

Meets carry-on luggage size requirements for most airlines
Constructed with lightweight boards made of Con-Pearl® which consist of three polypropylene layers.
The middle layer obtains its unique structure by thermoforming. Lamination to the outer layers results in a very light and stable trilaminate structure.
Flush-mounted rails allow the modules to be mounted evenly with the sides of the case
Lid allows to carry the case fully patched
6x 94HP rails with M3 threaded inserts
Total HP: 2x 3U/94HP + 1x 1U/94HP Total 282HP
Both Intelijel 1U or Pulp Logic 1U rails size can be chosen, you decide:)
You can specify your own 1U rail configuration during checkout, easy.
Konstantlab Boardpower lightweight PSU. +12V 2A, -12V 1.2A, 5V 1.5A
2 x MDLRCASE Passive busboard, total of 40 headers.
Total weight: 5.1 kg (w/ PSU, busboards and rails installed, including lid.)
1x side-mounted power switch + powerinlet
1x 1.8m power cords
1x Meanwell power adapter included
High-quality Penn Elcom components
Super-comfortable Luxe carrying handle
Anti-slip rubber feet
Completely assembled, wired, tested, and ready to play!

Dimensions

Outer Dimensions: 510mm x 325mm x 192mm including lid and hardware
Maximum Module Depth: 77mm
Maximum Module Depth above busboards: 61mm
Maximum Module Depth above the highest part of PSU: 26mm

PSU

Konstantlab Boardpower

Dimensiomns:10 × 4.5 × 2 cm
Weight:127 g

OUTPUT POWER: 45W

OUTPUTS:

+12V / 2A
-12V / 1.2A
+5V / 1.5A

INPUT
18V (16-20V)

OUTPUT CONNECTORS
2x 16 pin IDC for flat cable
4x WAGO spring terminals

INPUT CONNECTORS
WAGO spring terminals
Panel with 5,5 x 2.1 DC input (center positive) and switch included

PROTECTIONS
Input filter
Input overvoltage
Input reverse polarity voltage protection
Output overvoltage
Output short circuit – automatic recovery
Output over current – automatic recovery
All output protections are independent for each rail

DIMENSIONS 10 × 4.5 × 2 cm
127 g
OUTPUT POWER
45W

OUTPUTS
+12V / 2A
-12V / 1.2A
+5V / 1.5A

INPUT
18V (16-20V)

OUTPUT CONNECTORS
2x 16 pin IDC for flat cable
4x WAGO spring terminals

INPUT CONNECTORS
WAGO spring terminals
Panel with 5,5 x 2.1 DC input (center positive) and switch included

PROTECTIONS
Input filter
Input overvoltage
Input reverse polarity voltage protection
Output overvoltage
Output short circuit – automatic recovery
Output over current – automatic recovery
All output protections are independent for each rail

EFFICIENCY
92%

OTHER
Input common mode LC filter with high efficiency of canceling noise and interference from input connector
Additional input filter on each regulator for minima

Additional information

1U rails format

Intelijel, Pulp Logic

1U rails configuration

3U – 1U -3U, 1U- 3U- 3U, 3U – 3U – 1U