6U/126HP Eurorack rail set for building your own DIY Eurorack case.
The set consists of 1x 6U/126HP rails set:
4 x 126HP eurorack rail with lip, rails are already tapped with M5, hassle-free configuration.
4 x 126HP threaded inserts
2 x 3D printed 6U side brackets to connect your rails together
8 x screw M5x12 to fasten the rails to the side plates
8 x woodscrew M3x12 to fasten the rails set to your case
Dimensions 6U/126HP rails set complete row:
Complete set length= 647mm (126HP = 126x 5,08 = 640,08 + margin* = 641mm + 6mm sideplate thickness = 647mm total length
Width = 266mm
We 3D print all side brackets in our “in house” 3D print farm.
All side plates are 3d printed with high accuracy on the latest and most modern 3D printers. We tested a lot of different materials and chose the most robust polymer available on the market to assure maximum strength. We personally check all products on quality to ensure only the best quality.
Significant advances in using this additive manufacturing technique are:
Cheaper to produce, so less expensive for you to buy
It’s lightweight and super strong
It doesn’t scratch your beautiful case when installing your rails sets
*After years of building experience, we cut our rails with a small extra margin.
We’ve found that modules don’t always have an exact HP width. It can happen that when you cut the rails to exact 84HP dimensions, not all your modules will fit. The threaded strips/inserts have an exact 84HP size, so you can’t go wrong installing your modules. Trust us. We’ve been there.
The complete eurorack rails set is shipped unassembled and requires user assembly. This assures the lowest shipping cost possible.