1x 1U/126HP Eurorack rails set (Intellijel 1U size) complete row for building your own DIY Eurorack case.
The 1U Intellijel size/126HP eurorack rails set consists of the following parts:
2 x 126HP eurorack rail without lip, rails are already tapped with M5, hassle free configuration.
2 x 126HP threaded inserts
2 x 3D printed 1U Intellijel size side brackets to connect your rails together
4 x screw M5x12 to fasten the rails to the side brackets
4 x woodscrew M3x12 to fasten the rails set to your case
Dimensions: 1x 1U Intellijel size eurorack rail/126HP
Complete set length= 647mm (126HP = 126x 5,08 = 640,08 + margin* = 641mm + 6mm sideplate thickness = 647mm total length
We 3D print all side plates in our in-house 3D print farm.
All side plates are 3D printed with high accuracy on current generation 3D printers. We tested a lot of different materials and chose the most robust polymer available on the market to assure maximum strength. We personally check all products to ensure only the best quality.
There are significant advantages in using this additive manufacturing technique:
Cheaper to produce, so less expensive to purchase
Lightweight and incredibly strong
It doesn’t scratch your beautiful case when installing your rail sets
*After years of building experience, we cut our rails with a small extra margin.
We’ve found that modules don’t always have an exact HP width. It can happen that when you cut the rails to exact 84HP dimensions, not all your modules will fit. The threaded strips/inserts have an exact 84HP size, so you can’t go wrong installing your modules. Trust us. We’ve been there.
The complete rails set is shipped unassembled and requires user assembly. This assures the lowest shipping cost possible.