Eurorack rails set 1U/104HP (Intellijel 1U)


Out of stock

Out of stock

SKU: RS1U104HPINTEL Category:


1x 1U/104HP Eurorack railset (Intellijel 1U size) complete row for building your own DIY Eurorack case.


The set consists of the following parts: 1 x1U Intellijel size /104HP

2 x 104HP eurorack rail without lip, rails are already tapped with M5, hassle free configuration.
2 x 104HP threaded inserts
2 x 3D printed 1U Intellijel size side brackets to connect your rails together
4 x screw M5x12 to fasten the rails to the side brackets
4 x woodscrew  M3x12 to fasten  the rails set to your case


Dimensions: 1  x  1U Intelijel size /104HP

Complete set length= 536mm (104HP = 104x 5,08 = 528,32 + margin* = 530mm + 6mm sideplate thickness = 536mm total length
Height= 30mms
Width = 40,8mm


*After years of building experience, we cut our rails with a small extra margin.
We’ve found that modules don’t always have an exact HP width. It can happen that when you cut the rails to exact 84HP dimensions, not all your modules will fit. The threaded strips/inserts have an exact 84HP size, so you can’t go wrong installing your modules. Trust us. We’ve been there.

The complete rails set is shipped unassembled and requires user assembly. This assures the lowest shipping costs.



We 3D print all side plates in our in-house 3D print farm.
All side plates are 3D printed with high accuracy on current generation 3D printers. We tested a lot of different materials and chose the most robust polymer available on the market to assure maximum strength. We personally check all products to ensure only the best quality.

There are significant advantages in using this additive manufacturing technique:

Cheaper to produce, so less expensive to purchase
Lightweight and incredibly strong
It doesn’t scratch your beautiful case when installing your rails sets