Eurorack rail with lip 126HP

8.22

126HP Eurorack rail with lip

1x 126HP Eurorack rail with lip for building your own DIY Eurorack case.
Perfect to use in combination with 126HP threaded inserts and our side plate set to make your own rail sets.

Including M5 screws for mounting side plates or mount directly to the case.
Rails will be already tapped with M5 for you for easy installation.

Dimensions:
Length 126HP = 126x 5,08 = 640,08 + margin* = 641mm
Height= 19mm
Width/thickness 10mm

Category:

Description

126HP Eurorack rail with lip

1x 126HP Eurorack rail with lip for building your own DIY Eurorack case.
Perfect to use in combination with 126HP threaded inserts and our side plate set to make your own rail sets.

Including M5 screws for mounting side plates or mount directly to the case.
Rails will be already tapped with M5 for you for easy installation.

Dimensions:
Length 126HP = 126x 5,08 = 640,08 + margin* = 641mm
Height= 19mm
Width/thickness 10mm

*After years of building experience, we cut our rails with a small extra margin.
We’ve found that modules don’t always have an exact HP width. It can happen that when you cut the rails to exact 84HP dimensions, not all your modules will fit. The threaded strips/inserts have an exact 84HP size, so you can’t go wrong installing your modules. Trust us. We’ve been there.

Additional information

Weight 0.5 kg