Eurorack case 7U/126HP Performer Series Pro

875.21966.12

We’ve been listening to modular artists and have developed what we believe is the best solution for those in need of a flexible portable case. This professional handmade 7U / 126hp width Performer Series Eurorack modular synthesizer case is at home both on the road and in the studio.

This 7U case features one extra 1U row for use with both Intellijel 1U format or Pulp Logic/ Erthenvar tiles. Easily choose your required 1U tile size in the dropdown.

The case comes equipped with one MDLR PWR powered busboard (40 power headers in total) + one MDLR PWR extension board (total of 14 extra headers). This PSU setup giving you maximum space for your modules, strong power outputs, less heat then a conventional 220V PSU and by using low voltages inside the case a super safe PSU solution. Choose between 45W or 85W MDLRPWR, just what you need.

 

Clear
SKU: PSP7U126HP85W Category:

Description

7U/126HP  Performer Series Pro features:

  • This case is compatible with both Pulp Logic / Erthenvar and Intelijel 1U format
  • Choose your own rails configuration
  • 12mm birchwood fully nailed and glued construction
  • Sprayed with a special 2-layer black protective coating
  • Detachable lid, allows modules to be fully-patched during transport
  • Flush-mounted rails allow the modules to be mounted even with the sides of the case
  • 6x 126HP  rails with M3 threaded inserts
  • 45W or 85W MDLR PWR powered busboard (40 power headers in total)
  • One MDLR PWR extension board (total of 14 extra headers)
  • Total output  45W    2A on 12V, 1.2A on -12V and 1.5 on 5V
  • Total output  85W  4A on 12V, 2.5A on -12V and 1.5 on 5V
  • Recessed side-mounted power switch
  • One 1.8m power cords
  • Power adapter included
  • High-quality Penn Elcom components
  • Super-comfortable Luxe carrying handle
  • Anti-slip rubber feet
  • Completely assembled, wired, tested, and ready to play!

Dimensions (L/W/H)

  • 70,5 cm x 37,5 cm x 25 cm

Total Weight

  • 7,9. kg (includes rails, power supplies, and other hardware)

Module depth

  • 6,9 cm available depth between top of rail and bottom of case
  • 6.2 cm available depth between top of rail and busboard
  • 4.2 cm available depth between top of rail and protection plate PSU part
  • 5.3  cm available depth between top of rail and top of header on busboard

MDLRCASE MDLR PWR powered busboard

MDLR PWR is a high precision low noise and high-powered bus board for your eurorack modular systems. With a total of 40 headers (per busboard) you’ll never run out of connectivity, so all your beloved modules can be easily connected.  MDLR PWR  is universal so it can accept a wide range of mains voltages from 100V to 240V and so this can be used worldwide. MDLR PWR is fed with an external power brick which takes care of no high voltages inside the case.

MDLR PWR is available in two different types: 45W and 85W.

Outputs:

MDLRPWR 45W

Power 45W

+12V / 2A

-12V / 1.2A

+5V / 1.5A

 

MDLRPWR 85W

Power 85W

+12V / 4A

-12V / 2,5A

+5V / 1.5A

 

Technical specifications:

Dimensions 420 x 140mm

Height 23mm

Weight 400g

 

Output stability  ±1% for 0-100% load

Input 18V ( 16V – 20V )

Output Connectors 40 x 16 pin IDC for flat cable

Input connectors WAGO spring terminals + 5.5 / 2.1 DC inlet

Efficiency 92%

 

Protections:

Input overvoltage

Input reverse polarity

Output overvoltage

Output short current – automatic recovery

Output overcurrent – automatic recovery

All output protections are independent for each rail

 

  • Other Input common-mode LC filter with high efficiency of canceling noise and interference from input connector
  • Additional input filter on each regulator for minimal output noise and interferences
  • Shield for reducing RF interferences from regulators
  • Star distribution topology on PCB
  • Each “beam” from star topology has 4 headers with noise canceling capacitors.
  • In star topology center are another noise canceling capacitors
  • A big ground plane on both sides of PCB
  • Blue LEDs indicate present and drop of output voltage
  • Recommended power brick for one board – Mean well GSM60A18-P1J

Additional information

Weight 15 kg
Choose your power supply

45W, 85W

1U row order (top to bottom)

Pulp Logic 3U-3U-1U, Pulp Logic 3U-1U-3U, Pulp Logic 1U-3U-3U, Intellijel 3U-3U-1U, Intellijel 3U-1U-3U, Intellijel 1U-3U-3U